Complete Brand New Lowrance StructureScan SimRad LSS-1 System!!

Description

Complete Brand New Lowrance StructureScan LSS-1 System!!
This includes what you need to add SideScan and DownScan Imaging to your Lowrance Sonar Unit.
All are brand new and never installed:
Lowrance LSS-1 Module
Lowrance SST-DFSBLK Scanning Transducer
Lowrance LSS-1 Power Cable 032-0055-08
Lowrance SST Transducer Bracket
(You will need mounting screws as these were lost somewhere)
The LSS-1 System is still regarded as one of the best imaging systems out there. You will be very impressed with what it can do, and for a whole lot less than buying a new Live system for THOUSANDS MORE!!
From Manufacturer:
LSS-1 StructureScan Module, with Power Cable and Mounting Hardware Lowrance Model Number: LSS-1 Simrad Part Number: 000-10238-001 The Lowrance/Simrad LSS-1 StructureScan unit is a black box module designed to connect either direct to Lowrance, Simrad NSE, NSO and similar multifunction displays, or to a wider integrated Simrad navigation network. LSS-1 StructureScan produces high-detail, picture-perfect bottom viewing of the ledges, channels, drop-offs, and wrecks where fish conceal themselves. What makes the LSS-1 StructureScan so special? Sidescan Imaging reveals important structures such as rocks, wreckage and other fish habitats down to 46m (150ft) and up to 76m (250ft) on each side of the boat for faster, wider area surveys DownScan Imaging™ delivers an astonishingly highly defined image that removes all the guesswork as to what’s immediately under your hull, down to approx. 100m (300ft).
500w RMS output power.
The LSS-1 StructureScan module Installation is simplicity itself; the module can be mounted behind a panel or in a locker, and then it’s just a matter of connecting it up to a 10-18v DC power supply and, using simple plug-and-play Ethernet cables, connect up to three Lowrance or Simrad multifunction displays for viewing and independent display control.
The LSS-1 StructureScan imaging transducer Supplied with 6m (20ft) of cable, this 455/800 kHz transducer array is built to be uncompromisingly rugged, yet its fluid low-profile, low-drag design makes it ideal for mounting in a wide range of locations including the transom, transom step, jackplate and even trolling motors (with a simple, inexpensive adapter option). It also has a built-in water temperature sensor. The Lowrance StructureScan LSS-1 module will transform the way every boater, fisherman, or diver; amateur or professional locates and identifies underwater targets. StructureScan has shown to be a valuable tool for Search and Rescue, harbor, utility and other authorities who require precise information on the water.
What’s in the Lowrance/Simrad LSS-1 StructureScan Box?
LSS-1 StructureScan module Stainless steel transom-mount transducer bracket 4.6m (15ft) Ethernet network cable 12v DC power cable Installation and operation instructions